Q1. What are the key features of HM62-T?
A: Fenix HM62-T is an ultra-lightweight magnesium trail running headlamp. Its key features include:
1. 1200 lumens max output; 150 meters max beam distance; 23.7 hours runtimemode for trail running.
2. Neutral white light, Penetrating warm white spotlight, all-weather applicable.
3. Lightweight magnesium material.
4. Two-way adjustable headband with an emergency whistle.
Q2. What kind of LEDs are used in HM62-T?
A: One Luminus SST40 white light LED and two 2835 red light LEDs; with a lifespan of 50,000 hours each.
Q3. What is the color temperature of HM62-T?
A: The color temperature is 4500-5000K.
Q4. What is the operating voltage of HM62-T?
A: The operating voltage is 2.85V-7.4V.
Q5. Is HM62-T rechargeable? How long is the charging time?
A: The included 3400mAh is rechargeable. Charge the battery by inserting the USB Type-C end of the charging cable into the battery’s charging port. Charging the Fenix ARB-L18-3400U V2.0 using a 5V/2A charging adapter (not included) takes approximately 3 hours from drained to full.
Q6. How do I prevent accidentally activating the HM62-T?
A. Lock out the switch: with the lamp switched off, press and hold the switch for 3 seconds, the lamp will blink 4 times on the Low output of white light mode to indicate locked status. To unlock with the lamp locked, press and hold the switch for 3 seconds, the lamp will be activated on the Low output of white light mode. In locked status, clicking or pressing the switches will activate 4 blinks on the Low output of white light mode to indicate locked status.
Q7. Why does the HM62-T downshift to a lower mode after being used for a while and the higher mode cannot be selected?
A: There are two reasons:
1. Intelligent Overheat Protection. The lamp will accumulate a lot of heat when used at relatively high output levels for extended periods. When the lamp reaches a temperature of 50°C or above, the lamp will automatically step down a few lumens to reduce the temperature.
2. Low-voltage Warning. When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Eco output is reached.
Q8. Why does the HM62-T happen to flicker?
A: There are a couple of reasons that may cause the lamp to flicker, shine intermittently, or even fail to illuminate:
1: Poor battery level. Solution: Charging the battery or replace the battery (Ensure battery is inserted according to the manufacturer’s specifications).
2: The contact point or contact of the battery or headlamp is dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact the distributor.
Q9. What kind of battery can be used in HM62-T?
A: Fenix ARB-L18-3400U V2.0 battery is recommended but it is also compatible with 2 x CR123A batteries. Other Li-ion batteries are not recommended because the current and voltage output of other batteries may cause the headlamp to fail or not work properly.
Q10. How is the headlamp operated?
- On/off. Press and hold the switch for 0.5 seconds or double click the switch to turn on the lamp. Press and hold the switch for 0.5 seconds to turn off the lamp.
- Mode switching. With the lamp switched off, press and hold the switch for 0.5 seconds to turn on the lamp and enter the white light mode. With the lamp switched off, quickly double click the button to enter red light mode.
Output selection.
- White light mode: single click the switch to cycle through Low→Med→High→Turbo.
- Red light mode: single click the switch to cycle through Constant-on→Flash.
Q11. What should I do when the HM62-T needs repair?
A: 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
5-year free repair: Fenix will repair a light free of charge within 5 years (rechargeable battery: 1 year) of purchase if problems develop with normal use.
Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance.
