Fenix Flashlights | Fenix TK25 R&B The Tactical Flashlight with Red and Blue LEDs

*The Fenix TK25 R&B is discontinued. We have many lights can use a blue filter creating a blue light flashlight. For a tactical flashlight, pair the Fenix TK20R with the blue 34mm filter. For an everyday carry flashlight, use the blue AOF-S+ filter on the Fenix E30R. We also have red and green filters along with diffusers to turn your flashlight into a lantern.

Hello everyone. Today I'm going to be talking to you about the TK25 R&B. This is a new tactical flashlight from Fenix featuring a white LED, a red LED and also a blue LED, for multiple tactical reasons. The white LED provides 1,000 lumens, the red LED provides 150, and the blue deliver 60. The Fenix TK25 R&B is compatible with numerous tactical accessories, including gun mounts, pressure switches, basically anything you will need to make this R&B the tactical version versatile light that will fit your rifle and that you can take it for a lot of hunting and a lot of tactical demanding situations.

Some additional other quick features regarding the Fenix TK25 R&B is that is does have dual switches on the tail cap, meaning whenever you attach a remote pressure switch to this, you will be able to change the modes with the switch, unlike the lights that have the mode switch on the side of the light, whenever you attach a remote switch to that, all you will be able to do is turn the light on and off.  With the TK25 R&B, with the dual switches on the back, you will be able to fully control the light with the pressure switch. The Fenix TK25 R&B does offer free switching between the three light sources. Like I said, the tactical dual tail switches. It does have patent technique of rotary mode switching and it does also offer 1,000 lumen output which reaches about 225 meters.

Regarding the tactical dual tail switch, it does make it really easy for one hand operation. It does have the main tactical switch that will be your main power on and off button. It does have momentary on light, so you can half press to have the light on momentarily or do a full press to turn it on constantly. The second switch is the functional switch. Whenever you have the light on, you'll simply click to select the different output levels. Also with this TK25 R&B, whenever it is off, you can press the function switch and that will give you instant strobe activation. Whenever you are in the red mode it will give you the high mode within the red LED. Then you'll simply just release the button to turn it off.

The Fenix pressure switch that is compatible with the Fenix TK25 R&B is the Fenix AER-03 remote pressure switch. Also, it is compatible with the Fenix ALG-00 flashlight gun mount. The quick release one. You can use both of those to mount to your weapon and then take the TK25 R&B into your tactical situations.

A few tactical features regarding the body of the flashlight. It does have titanium body clip. It is made of durable aircraft grade aluminum. It does have a premium type three hard-anodized anti-abrasive finish. It does include the toughened ultra-clear glass lens with anti-reflective coating. Like I said, it has the dual tail switches and it also has a dual layer body. It is IP68 rated, so it's dustproof, so it will totally protect against dust and foreign objects, as well as water proof. It's submersible up to two meters. It's essentially fearless of all those harsh environments that you may have to endure.

It does have intelligent memory circuit, which means whenever you have the light on, you turn it off in high mode. Once you go back to turn it back on, the next time you do it will turn back on into high mode. Or, whichever mode you last left it off on. It is digitally regulated, so it will maintain a constant brightness. Essentially, that means it's just going to optimize your run time and the lighting effectiveness under the constant output. It does have intelligent overheat protection, so it's going to avoid high surface temperatures. It also does have a low voltage warning. When the voltage level drops below the preset level, the light will start lowering brightness just to remind you to replace the battery.

Now we'll go over the actual modes. What you will do is simply just press the power switch and you start off in the low mode which is 15 lumens. That runs for about 110 hours and throws the light about 25 meters.  One simple click of the function switch will go to medium which is at 100 lumens. That will run for 22 hours and 20 minutes and that can reach 75 meters. The high mode of 300 lumens has a run time of 5 hours and 20 minutes. It can shine 124 meters. The turbo 1,000 lumen mode can run for 2 hours and it has a distance of 225 meters. These run times are measured using a Fenix ARB-L18-3500 mAH lithium ion battery.

To switch into the color modes, all you will do is simply twist the rotating head until you can line up a little white dot on the 'C' for color. Then the operation is still the same. You'll do a simple click of the power switch to turn it on and you will be in your color modes. The red high mode is 150 lumens and that runs for about 7 hours and 30 minutes and it reaches 132 meters. The red low mode is 25 lumens and that can run for 40 hours and it reaches 49 meters. Then your blue mode has 60 lumens and it can run for 6 hours and 40 minutes and it can reach about 41 meters. Then you have your strobe which is at 1,000 lumens.

A few other of the features of the Fenix TK25 R&B are that it uses the CREE XP-G2 S3 and the XP-E2 red and blue LED's with lifespans of 50,000 hours. It is powered by either a single 18650 rechargeable lithium ion battery or another power source is two of the three volt CR123A lithium batteries. It does weigh about 156.5 grams, which equates to about .3 pounds. It also does measure about 143 millimeters in length. The body diameter is a little over 25 millimeters. The head diameter is a bit bigger at 40 millimeters. You do have the free switching between the white, the red and the blue LED's, again with the rotating head to choose between the white LED and then the colored LED's.

To touch on the protection, it does have the reverse polarity protection. It will protect against improper battery insertion just to protect the battery itself and the flashlight. Again, it does have the tactical tail switch. It does have momentary activation for momentary on and then also the instant strobe. It does have the durable aircraft grade aluminum with the premium type three hard-anodized abrasive finish as well.

Now I will go over what comes with your package whenever you purchase a Fenix TK25 R&B. First of all, it will come with, of course, the TK25 R&B. It will come with a lanyard, a holster. It will come with a spare O-ring and it will also come with a body clip, a user manual and a warranty card.

A few features that you may not know is I will go over the actual different LED's. The white light is, of course, used for regular illumination and for equipment and prey checking before and after hunting. Fenix TK25 R&B does have four different output levels. They have a max of 110 hours of run time with the white LED. The red LED is widely used for hunting and protects the night vision.  We do have the high mode of red that is 150 lumens and throws about 132 meters. The blue LED is applied in night fishing and tracing, whenever you are working to track down the animal during hunting.

That is going to wrap up the Fenix TK25 R&B. I hope I was able to educate you on one of the new tactical flashlights from Fenix. I thank you for stopping by.