Fenix E20 V2.0 EDC Flashlight - 350 Lumens

Performance Highlights

• Output: Up to 350 lumens on High, throwing to 413 ft.
• Runtime: Up to 200 hours on Eco with two AA batteries.
• Durability: IP68 rated, fully submersible to 6.5 ft for 30 minutes.
• Build: 100,000-cycle-tested tail switch on a hard-anodized aluminum body.

Full mode-by-mode output, runtime, distance, and intensity figures are shown in the specifications chart above.

Key Features

• Luminus SST20 LED rated for a 50,000-hour lifespan
• Single reverse tail switch cycles Eco → Low → Med → High
• Digitally regulated circuit with intelligent overheat and reverse-polarity protection
• Ultra-thin patented optical lens with an 85° beam angle for a soft, balanced flood

Battery & Charging

• Included: Two non-rechargeable AA alkaline batteries
• Recommended: Two rechargeable Ni-MH AA batteries (Energizer brand recommended)
• Not supported: 14500 rechargeable Li-ion batteries

Size & Weight

• Dimensions: 5" long x 0.83" head diameter x 0.66" body diameter
• Weight: 1.48 oz (excluding battery)

What kind of LED is used in E20 V2.0?

The Fenix E20 V2 uses a Luminus SST20 LED.

What batteries work with the Fenix E20 V2 flashlight?

The Fenix E20 V2 is compatible with and includes two Alkaline AA batteries. You may also use two Ni-MH AA batteries, or two non-rechargeable lithium AA batteries.

Does the E20 V2 feature overheat protection?

Yes, the light will accumulate heat, especially when used on higher output levels. If the light reaches a temperature of 140° F (60° C) the output will automatically step down by 1% every second until the Med output is reached. Once the temperature has been reduced below this threshold the output will step up by 1% every second until the previous output has been restored.

The Fenix E20 V2.0 is a portable outdoor EDC flashlight. This summary is drawn from the manufacturer's official user manual — see the downloadable PDF reference manual on the product page for complete details.

Overview

The E20 V2.0 delivers up to 350 lumens maximum output from a Luminus SST20 LED rated for a 50,000-hour lifespan, powered by 2 x AA batteries (Ni-MH or Alkaline).

• A Luminus SST20 LED with a lifespan of 50,000 hours.
• Powered by 2 x AA batteries (Ni-MH/Alkaline).
• Digitally regulated circuit for a stable output.
• Intelligent overheat protection.
• Reverse polarity protection.
• One-handed operation with the reverse tail switch.
• Made of A6061-T6 aluminum with premium type HAIII hard-anodized anti-abrasive finish.
• Automobile ultrathin patented optical lens coating.
• Size: 5.00" x 0.83" x 0.66" / 127 x 21 x 16.8 mm.
• Weight: 1.48 oz / 42 g (excluding battery).

Operating Instructions

On/Off: Fully press the tail switch to turn on/off the light.

Output Selection: With the light on, tap the tail switch to cycle through Eco → Low → Med → High.

Battery Specifications

• Ni-MH Battery (AA, 1.2V): Recommended.
• Alkaline Battery (AA, 1.5V): Usable.
• Non-rechargeable Battery (AA, 1.5V): Usable.
• Rechargeable Li-ion Battery (14500, 3.7V): Banned.

Battery Replacement: Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.

Low-Voltage Warning

When voltage drops below the level required for the selected mode, the light steps down until Eco is reached, and keeps operating until the batteries are fully depleted.

Intelligent Overheat Protection

At 58°C or above on High, output steps down about 1% per second until it reaches Med; original output is restored on the next power-on once the light cools.

Technical Parameters (ANSI/PLATO FL1)

• High: Output 350 lumens, Runtime 3h 45m (Alkaline) / 1h 30m (Ni-MH), Distance 126 m, Intensity 3950 cd, Impact Resistance 1 m, Submersible IP68 (2 m underwater)
• Med: Output 150 lumens, Runtime 11h 15m (Alkaline) / 5h 30m (Ni-MH), Distance 76 m, Intensity 1448 cd, Impact Resistance 1 m, Submersible IP68 (2 m underwater)
• Low: Output 30 lumens, Runtime 93h 35m (Alkaline) / 34h 30m (Ni-MH), Distance 35 m, Intensity 288 cd, Impact Resistance 1 m, Submersible IP68 (2 m underwater)
• Eco: Output 5 lumens, Runtime 200h (Alkaline) / 140h (Ni-MH), Distance 15 m, Intensity 44 cd, Impact Resistance 1 m, Submersible IP68 (2 m underwater)

Specifications are Fenix lab testing results using a 1900mAh/Eneloop Ni-MH battery and a quality Alkaline battery at 21±3°C and 50–80% humidity.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the light will not be used for an extended period, remove the battery to avoid damage from electrolyte leakage or battery explosion.
• Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear; replace with an approved spare to maintain a proper water seal.
• Periodic cleaning of the battery contacts improves performance — clean with a cotton swab soaked in rubbing alcohol if flickering occurs, or contact your authorized distributor.

What's Included

Fenix E20 V2.0 flashlight, 2 x AA batteries, spare O-ring, wrist lanyard, user manual, warranty card.