Fenix PD32R Rechargeable Silent Switch LED Flashlight

Outputs

• Turbo: 1400 Lumens, 2.33 hours, 1129 feet
• High: 350 Lumens, 4.42 hours, 574 feet
• Med: 100 Lumens, 16.33 hours, 302 feet
• Low: 20 Lumens, 70 hours, 138 feet
• Strobe: 1400 Lumens

Details

• 1400 Lumen maximum output
• 344-meter beam distance
• Silent multi-functional tail switch
• Single switch operation
• Rechargeable via hidden USB-C charging port
• Instant strobe
• Battery level indicator
• 3400mAh 18650 battery included
• Up to 70 hours of runtime
• Dual internal springs for safer battery suspension
• Drop resistant to 1.5 meters
• IP68 waterproof rating
• High strength and impact resistant A6061-T6 aluminum body
• HAIII hard-anodized anti-abrasive finish for wear and corrosion resistance

Batteries

• Included: Fenix ARB-L18-3400 rechargeable 3400mAh 18650 battery
• Compatible: One Fenix 18650 battery or two non-rechargeable CR123A batteries.

Size

• Length: 5.32 inches
• Diameter: 1.04 inches
• Weight: 4.8 ounces (including battery)

Q: What kind of LED is used in PD32R?

A: A Luminus SFT40 LED with a lifespan of 50,000 hours.

Q: What is the color temperature of PD32R?

A: Around 6500K.

Q: What is the operating voltage and the operating current of PD32R?

A: The operating voltage is 2.9 - 6.0 V. The max operating current is 5.2 A.

Q: How to prevent accidentally activate the PD32R?

A: Loosen the light tail, or remove the battery to prevent accidental activation.

Q: Is PD32R rechargeable? How long is the charging time?

A: Yes. Loosen the light neck to reveal the USB Type-C charging port and battery level indicator. The indicator will display red while charging and will turn green when fully charged. The normal charging time is approximately 3 hours from depleted to fully charged with a 5 V/2 A charging adapter.

Q: Why does the PD32R downshift to a lower mode after being used for a while and the higher mode cannot be selected?

A: There are two reasons:
1. Intelligent Overheat Protection
The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the Low mode is reached.

Q: Why does the PD32R happen to flicker?

A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

Q: What kind of battery can be used in PD32R?

A: It is recommended to use a Fenix ARB-L18-3400 battery, or two CR123A batteries. While using two CR123A batteries, the actual max output is 800 lumens, the max beam distance is 270 meters and the max runtime is 30 hours at Low output. Other
Li-ion batteries are not recommended. As an unmatched battery may cause the flashlight to fail to work normally.