Fenix BC06R Smart-Brake Bicycle Taillight

Outputs

• High: 30 Lumens
• Constant-On: 5.5 hours
• Slow Flashing: 5.5 hours
• Fast Flashing: 8 hours
• Low: 10 Lumens
• Constant-On: 12.5 hours
• Slow Flashing: 14.5 hours
• Fast Flashing: 25.5 hours
• Spinning light mode: 10 Lumens, 22 hours
• Active Braking: 90 Lumens, 100 meters

Details

• Brake sensing function
• Seatpost and saddle rail mounting options
• Fits seatposts between 25.4-31.6mm
• Fts saddle rail mounts between 39-50mm
• USB Type-C charging - fully charged in 2 hours
• 270 degree lighting angle
• IP66 rated waterproofing
• 30 lumen red light with a 90 lumen burst when braking
• 100 meter alerting distance
• multiple lighting modes including constant-on, slow flashing, fast flashing, and spinning light
• 24.5 hours runtime
• Battery level indicator

Batteries

• Built-In: 560mAh USB-C Rechargeable Battery

Size

• Length: 1.5 inches
• Height: 1.5 inches
• Diameter: 1.5 inches

Q: What kind of LEDs are used in BC06R?

A: The BC06R uses CREE XP-E2 red LEDs.

Q: What is the working voltage of BC06R?

A: Operating voltage is 3.0~4.2V, limit operating voltage range: 2.8~4.2V.

Q: What is the viewing angle of BC06R?

A: The viewing angle is 270°，and the floodlight luminous angle is 106°.

Q: Is BC06R rechargeable? How long is the charging time?

A: BC06R is rechargeable with a USB Type-C charging port. The indicator will display red while charging and will turn green when fully charged. The charging time is about 2 hours. 

Q: Can BC06R be used in severe weather such as rain and sandstorm? 

A: BC06R features IP66 rated protection: fully protected against dust and foreign objects, can withstand heavy rain and splashes.

Q: BC06R will automatically reduce the brightness after using it for a while, and it can't light up higher gears, why is that?

A: When the voltage level drops below 3.0V, the light is programmed to downshift to a lower brightness level. The battery level indicator blinks red at 3Hz to remind you to recharge the battery. To ensure normal use, the light will not turn off automatically and will work till the battery level runs out.

Q: Does the BC06R have a memory mode?

A: The light memorizes the last selected output excluding Braking. When turned on again, the previously used output will be recalled.

Q: How do you install the BC06R taillight

A:
Seatpost mount:

First loop the mounting strap (without LOGO) around one of the attachment ear of the seatpost mount, and place the seatpost mount(silicone pad thinner side face up) on the seatpost, then loop the other end of the mounting strap (with LOGO) around the other attachment ear of the seatpost mount, adjust as the size of the seat post. Finally, attach the BC06R taillight to the seatpost mount with the switch facing upwards.

Note: This taillight is applicable to bike seatpost diameters between 25.4mm - 31.6mm.

Saddle rail mount:

Place the saddle rail mount on the saddle rails of the bike. Thread a fastening tie through the top hole on one side of the mount, and tie the corresponding saddle rail and the saddle mount together. Repeat the same process for the other side. Trim any excess parts of the fastening ties. Attach the BC06R taillight to the saddle rail mount with the switch facing upwards.