Fenix PD36R ACE Customizable Multi-Mode Flashlight

Outputs

• Turbo: 3000 Lumens, 3.03 hours, 1362 feet
• High: 1000 Lumens, 3.47 hours, 771 feet
• Med: 350 Lumens, 8.82 hours, 450 feet
• Low: 150 Lumens, 21.82 hours, 292 feet
• Eco: 30 Lumens, 63.42 hours, 131 feet
• Outputs are customizable using the SET option modes:
• Option 1: Access to Turbo and Strobe outputs only; ideal for tactical scenarios.
• Option 2: Access to Eco, Med, Turbo, and Strobe outputs; ideal for duty use outside of tactical situations.
• Option 3: Access to all brightness outputs; ideal for every day carry and standard use.

Details

• 3000 lumens maximum output
• Patented 3-in-1 SET customization options
• Independent strobe control
• Hidden USB-C port
• 415-meter beam distance
• Three switches for efficient operation
• Instant-on strobe
• Large capacity battery
• IP68 rated waterproofing
• 1.5-meter drop resistance

Batteries

• Included: Fenix ARB-L21-5000 V2 Rechargeable 5000mAh 21700 battery
• Compatible: Any Fenix 21700 battery, or 18650 if using the ALF-18 battery adapter

Size

• Length: 5.75 inches
• Head Diameter: 1.18 inches
• Body Diameter: 1.02 inches
• Weight: 6.41 ounces including battery

Q: What kind of LED is used in PD36R ACE?

A: A LuminusSFT70 Gen2 LED with a lifespan of 50,000 hours.

Q: What is the color temperature of PD36R ACE?

A: Around 6500K.

Q: What is the working voltage of PD36R ACE?

A: The working voltage is 2.8V～4.2V.

Q: Is PD36R ACE rechargeable? How long is the charging time?

A: Yes, PD36R ACE is rechargeable with a hidden USB Type-C port. The indicator will display red while charging and will turn green when fully charged. The normal charging time of the included battery is about 3 hours from depleted to fully charged.

Q: Why does the PD36R ACE downshift to a lower mode after being used for a while and the higher mode cannot be selected?

A: There are two reasons: 

1. Intelligent Overheat Protection

The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. 

2. Low-voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached. 

Q: Why does the PD36R ACE sometimes flicker?

A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:

1. Poor battery level.

Solution: Recharge or replace the battery.

2. The contact or contact point of the battery or flashlight is dirty.  

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.

Q: What are the optional accessories for PD36R ACE?

A: The PD36R ACE flashlight package comes with a lanyard and a holster. Other compatible accessories include:

• AER-02 V2.0 Remote pressure switch
• ALG-00 Flashlight ring 
• ALG-15 Rail mount
• ALG-16 Rail mount
• AOT-S+ Traffic wand
• AOS-F+V2.0 Filter adapter
• AOD-S V2.0 Diffuser tip.

Q: How to operate the SET mode of PD36R ACE?

A: The SET mode features 3 lighting options, which can be selected based on various application scenarios and users’ usage habits. The operations are as follows:

1. Loosen the light neck to reveal the hidden SET switch.
2. With the light turned on, single click the SET switch to cycle through Option 1(1 output)→Option 2(3 outputs)→Option 3(5 outputs). When users turn on the flashlight for the first time, Option 3 will be selected by default.
3. When a lighting option is selected, its corresponding indicator will display green for 3 seconds to confirm the selection. The corresponding numbers indicate the currently available output amounts for each option.