Fenix PD45R ACE Multi-Mode Tactical Flashlight

Outputs

• Turbo: 3200 Lumens, 2.33 hours, 1345 feet
• Ultrahigh: 1400 Lumens, 3.33 hours, 827 feet
• High: 600 Lumens, 5.5 hours, 541 feet
• Med: 300 Lumens, 9.5 hours, 387 feet
• Low: 100 Lumens, 30 hours, 217 feet
• Eco: 30 Lumens, 57 hours, 118 feet
• Strobe: 3200 Lumens

SET Customization Options

Limit which outputs are available for ease of use in different scenarios.

• Option 1: Ultrahigh, Strobe
• Option 2: Turbo, Low, Strobe
• Option 3: Turbo, High, Eco, Strobe
• Option 4: Turbo, Ultrahigh, Med, Eco, Strobe
• Option 5: Turbo, Ultrahigh, High, Low, Eco, Strobe
• Option 6: All outputs available

Details

• Patented SET customization feature
• Custom mode selection ring
• Lockout function
• Hidden USB-C Charging Port
• 6000mAh battery included
• 410-meter beam distance
• 3200 Lumen maximum output
• IP68 rated waterproofing

Batteries

• Included: Fenix ARB-L21-6000 rechargeable 6000mAh 21700 battery
• Compatible: Any Fenix 21700 battery. Also compatible with 18650 batteries when using the ALF-18 battery adapter (functions may be limited when using 18650 batteries).

Size

• Length: 6.21 inches
• Head Diameter: 1.18 inches
• Body Diameter: 1.02 inches
• Weight: 7.07 ounces (including battery)

Q: What kind of LED is used in PD45R ACE?

A: A Luminus SFT-70X-WS65-H2-H1652 LED with a lifespan of 50,000 hours.

Q: What is the color temperature of PD45R ACE?

A: Around 6500K.

Q: What is the working voltage of PD45R ACE?

A: The working voltage is 3.0 V - 4.2 V.

Q: Is PD45R ACE rechargeable? How long is the charging time?

A: Yes, PD45R ACE is rechargeable with a hidden USB Type-C port. The indicator will display red while charging and will turn green when fully charged. The normal charging time of the included battery is about 3 hours from depleted to fully charged.

Additional question: Does the charging port remain waterproof after any water ingress?

A: The USB Type-C charging port features an inner waterproof design, enabling normal charging operations following any water ingress. After ensuring the port is thoroughly dried, users can start the charging process. 

Q: How to prevent accidentally activating the PD45R ACE?

A: The PD45R ACE features the Lock mode for locking and unlocking the flashlight.

Lock: 

1. With the light switched on, rotate the mode selector ring to “” to lock the currently selected output. Pressing or tapping the tactical tail switch cannot change the output or turn off the light. 
2. With the light switched off, rotate the mode selector ring to “” to lock the tactical tail switch. Pressing or tapping the tactical tail switch cannot turn on the light.

Unlock:

Rotate the mode selector ring from “” to any designated mode to unlock the flashlight. After unlocking the flashlight, the tactical tail switch functions properly.

Q: Why does the PD45R ACE downshift to a lower mode after being used for a while and the higher mode cannot be selected?

A: There are two reasons: 

1. Intelligent Overheat Protection

The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. 

2. Low-voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached. 

Q: Why does the PD45R ACE happen to flicker?

A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:

1. Poor battery level.

Solution: Recharge or replace the battery.

2. The contact or contact point of the battery or light is dirty.  

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.

Q: What kind of battery can be used in PD45R ACE? 

A: The PD45R ACE flashlight package comes with a Fenix ARB-L21-6000 battery. It is recommended to use a Fenix ARB-L21 series battery. Other Li-ion batteries are not recommended, as an unmatched battery may cause the flashlight to fail to work normally.

Q: What are the optional accessories for PD45R ACE?

A: The PD45R ACE flashlight package comes with a lanyard and a holster. Other compatible accessories include:

• AER-04 Remote pressure switch 
• AER-05 Remote pressure switch 
• ALG-00 Flashlight ring 
• ALG-18 Flashlight ring
• ALG-15 Rail mount
• ALG-16 M-LOK quick-release rail mount, etc.

Q: How to operate the SET mode of PD45R ACE?

A: The SET mode features 6 different output settings, which can be selected based on various application scenarios and users’ usage habits. The operations are as follows:

1. Enter the SET mode  

→Turn the mode selector ring to “SET.” 

→number of flashlight blink(s)=current option number=available output amount

(e.g., flashlight blinks once = current option is Option 1 = 1 output available, and so forth for other options)  

2. Define your target option  

→Fully press the tactical tail switch.  

→number of your press(es) = target option number = available output amount  

(e.g., Want Option 6/6 available outputs? Fully press 6 times.)  

→The flashlight blinks to confirm your selection.  

(e.g., flashlight blinks 6 times = Option 6 has been selected = 6 available outputs)  

3. Save and use

→Rotate back to the General mode to activate.

(The light automatically memorizes the selected option)