What material is the lens of the HM75R made of?
High-quality PC-1250Z material.
What kinds of LEDs are used in HM75R?
A Luminus SST40 cold white LED, two Luminus SST20 neutral white LEDs, and an
OSRAM GR QSSPA1.23 red light LED; with a lifespan of 50,000 hours each.
What is the color temperature of HM75R?
Spotlight mode: 6500K. Floodlight mode: 4000K.
What is the operating voltage of HM75R and power extender?
HM75R headlamp : 2.85 V - 7.4 V.
Power extender: 3.2 V - 4.2 V.
Why is it not possible to select higher modes when the HM75R is charged by the power extender?
When using the power extender to charge the HM75R headlamp, the headlamp is charged indirectly, and the power extender is not capable of driving large currents. As a result, the actual brightness of each output depends on the charging voltage when the HM75R is charged by the power extender
Why does the power extender still discharge when the HM75R is fully charged?
With the light load detection function switched on, the power extender will automatically stop discharging when the headlamp is fully charged. Re-insert the Type-C plug and click the Switch B or re-insert the battery to restart discharging.
Why does the HM75R downshift to a lower mode after being usedvfor a while and the higher mode cannot be selected?
There are two reasons:
1. Intelligent Overheat Protection
The lamp will accumulate a lot of heat when used at relatively high output levels for extended periods. When the lamp reaches a temperature of 60°C or above, the lamp will automatically step down a few lumens to reduce the temperature.
2. Low-voltage Warning
When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Low output is reached.
How to prevent accidentally activate the HM75R?
Rotate the rotary switch to the Power symbol.
What kind of batteries can be used in HM75R and power extender?
For the HM75R headlamp, the Fenix ARB-L18-3400 battery is recommended. For the power extender, the ARB-L21-5000 V2.0 battery is recommended. Other Li-ion batteries are not recommended. As High output fails to headlamp up due to current
and voltage limitation, an unmatched battery may cause the headlamp to fail to work normally.