Fenix BC30 V2.0 dual-LED bike light on its handlebar mount, angled view
Fenix BC30 V2.0 intelligent high-output wireless control bicycle light
Fenix BC30 V2.0 wireless remote switch for instant operation
Fenix BC30 V2.0 accurate battery level indicator
Fenix BC30 V2.0 quick-release bicycle mount
Fenix BC30 V2.0 dual distance beam system for near and far lighting on a bike
Fenix BC30 V2.0 wide beam lighting a trail ahead of a bike
Fenix BC30 V2.0 bicycle light used with a helmet light
Fenix BC30 V2.0 lit in heavy rain, IP67 rated protection
Fenix BC30 V2.0 withstands bitter cold and extreme heat, shown in ice
Fenix BC30 V2.0 tough and reliable aluminum body
Fenix BC30 V2.0 technical parameters table
Fenix BC30 V2.0 retail package and included items: bike light, bicycle mount, wireless switch, CR1632 battery, spare O-ring, thin and thick mounting shims, manual and warranty card
Fenix BC30 V2.0 bike light mounted on a handlebar, side view
Fenix BC30 V2.0 top view of the power switch and battery indicator
Fenix BC30 V2.0 wireless remote switch with its strap

Fenix BC30 V2 LED Bike Light

Regular price$89.95
/
Shipping calculated at checkout.

Suggested Add-Ons

Details about Fenix ARB-L18-3500 High-Capacity 18650 Battery - 3500mAh (opens in a new tab)
Details about Fenix ALD-10 Bike Light Holder with GoPro Interface (opens in a new tab)
Details about Tenergy Propel CR123A 3v Lithium Battery - 4 Pack (opens in a new tab)

Ticked items are added to your order along with this product.

Official U.S. Fenix retailer since 2006 · Genuine products with full warranty support · How to spot a counterfeit

  • In stock, ready to ship
  • Inventory on the way
  • Satisfaction guaranteed
  • Free shipping for orders $25+
  • Backed by the Fenix Limited Lifetime Warranty

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Product highlights

The Fenix BC30 V2 is a 2200 lumen bike light built around a dual-beam design that gives you both reach and coverage in one unit, throwing a beam up to 610 feet (187 meters) so you can see — and be seen — well before it matters. Five output levels from a 2200-lumen burst mode down to a battery-sipping 50-lumen eco mode let you match brightness to the ride, whether that's a fast descent or a steady commute.

A wireless remote control switch mounts within easy reach on your handlebars, so you can shift brightness without ever taking a hand off the bars or breaking your line through a turn. The BC30 V2 runs on two rechargeable 18650 batteries or four CR123A batteries (each sold separately), giving you flexibility in how you power it depending on what you have on hand or how long you're planning to ride. For cyclists and mountain bikers who want serious, adjustable output and the convenience of remote control without fumbling for a switch mid-ride, the BC30 V2 delivers exactly that.

Performance Highlights

  • Output: 2200-lumen Burst mode reaching up to 614 ft (187m); a dual-distance beam system splits high and low throw for versatile trail and road use.
  • Control: wireless remote switch includes an instant-Burst button for quick full-power bursts.
  • Durability: IP67 rated (submersible to 3.3 ft for 30 min), A6061-T6 aluminum body, compatible with the ALD-08 helmet holder.

Full mode-by-mode output, runtime, distance, and intensity figures are shown in the specifications chart above.

Key Features

  • Two Luminus SST-40-N5 LEDs with a 50,000-hour lifespan
  • Single-switch and wireless-remote control cycling Eco/EDC → Low → Med → High → Burst, plus a dedicated Flash mode
  • Quick-release bike mount with shims for different handlebar diameters
  • Battery level indicator with low-voltage warning
  • Can double as a handheld flashlight

Battery & Charging

  • Compatible: two 18650 rechargeable batteries (recommended: Fenix ARB-L18-3500) or four CR123A batteries — batteries sold separately
  • Battery Replacement: unscrew the tail cap to swap cells
  • Compatibility: 18350 Li-ion cells are NOT supported; use only protected, matched batteries of the same type

Size & Weight

  • Dimensions: 4.72" x 1.98" x 1.27" (120 x 50.5 x 31.6 mm)
  • Weight: 5.43 oz / 154 g (excluding battery and mount)
  • BC30 V2.0 Bike Light
  • Bicycle Mount
  • Wireless Remote Switch
  • CR1632 Remote Switch Battery
  • Spare O-ring
  • Bicycle Mounting Shim (Thin)
  • Bicycle Mounting Shim (Thick)
  • User Manual
  • Warranty Card

Can I buy a replacement remote switch or handlebar mount for my BC30 V2?

Yes. Contact Fenix Store support through live chat (the chat button on any page of fenix-store.com) or at support@fenix-store.com to order parts and other included accessories.

What batteries does the BC30 V2 use?

Two 18650 rechargeable batteries (Fenix ARB-L18 series recommended) or four CR123A batteries. Batteries are sold separately. Li-ion 16340 batteries are also usable. LiFePO4 cells should be used with caution, and 18350 cells must not be used. Always use protected, high-drain batteries of the same brand, type and age; don't mix old and new.

How do I charge the BC30 V2?

The BC30 V2 has no built-in charging port. Charge the 18650 batteries in a separate battery charger, then swap them back in by unscrewing the tail cap.

What Fenix bike light is best for long rides?

The BC30 V2 is a good choice for long rides because its batteries are replaceable. Carry a spare set of 18650s and swap them out mid-ride instead of waiting for a recharge.

How long does the BC30 V2 run?

With two Fenix ARB-L18-3500 batteries: about 2.3 hours on High (1500 lumens), 6 hours on Med (600), 16 hours on Low (200) and 50 hours on Eco (50). Burst (2200 lumens) is meant for short bursts.

How do I pair the wireless remote switch?

Keep the remote within about 1.5 meters (5 feet) of the light. Press and hold the light's functional switch for 5 seconds until it flashes red and green, then quickly click a button on the remote. The light flashes green to confirm the pairing. The remote remembers the light after that, so you only need to pair once.

What does the wireless remote do?

It mounts on your handlebar and has two buttons. The output button cycles Eco, Low, Med, High and Burst. The Burst button gives you instant 2200 lumens, whether the light is on or off, then returns the light to its previous setting (or off) about 30 seconds after you release it. The remote runs on a CR1632 coin battery, which is included.

Does the BC30 V2 have overheat protection?

Yes. The light builds up heat on Burst and High, so it automatically lowers its output when it gets too hot, to protect the light and you.

How do I know when the batteries are low?

The functional switch flashes red when the batteries need replacing or recharging. The light then holds a low output instead of shutting off, so you're not left in the dark. This warning may not work reliably with CR123A batteries.

Is the BC30 V2 waterproof?

It's rated IP67, which means it can be submerged in up to 1 meter (3.3 feet) of water for 30 minutes. Riding in rain is no problem.

Will it fit my handlebar or helmet?

It comes with a quick-release bike mount plus thin and thick shims to fit different handlebar diameters. It also works with the Fenix ALD-08 helmet holder, and you can take it off the mount and use it as a handheld flashlight.

Who is the BC30 V2 best for?

Mountain bikers and riders on unlit roads and trails. It puts out up to 2200 lumens with a dual-distance beam that lights both far ahead and the trail at your wheel, reaching up to 614 feet (187 meters). The handlebar remote lets you change brightness or hit Burst without taking your hands off the bars.

The Fenix BC30 V2.0 is a high-performance smart wireless bicycle light. This summary is drawn from the manufacturer's official user manual — see the downloadable PDF reference manual on the product page for complete details.

Overview

  • 2 LUMINUS SST-40-N5 LEDs, with a lifespan of 50,000 hours.
  • 2200 lumens maximum output.
  • Powered by 2 x 18650 rechargeable Li-ion batteries; batteries are replaceable.
  • Smart wireless control switch (handlebar-mounted remote).
  • Size: 4.72" x 1.98" x 1.27" / 120 x 50.5 x 31.6mm.
  • Weight: 5.43oz / 154g (excluding battery and mount).
  • Battery level indication and low-voltage warning.
  • Reliable all-metal body, easy to assemble and disassemble.
  • Compatible with Fenix bicycle light holder; can be used as a flashlight.
  • Dual Distance Beam System.

Operating Instructions

Bicycle Light Switch (Functional Switch)

On/Off: Press and hold the functional switch for 0.5 seconds to turn the light on/off.

Output Selection: With the light switched on, single click the functional switch to cycle through Eco/EDC → Low → Med → High → Burst.

Flash: With the light switched on, double click the functional switch to enter flash mode; single click to switch back to general mode.

Wireless Remote Switch

Switches: Output Selection switch and Burst switch.

First Connection: Press and hold the functional switch on the light for 5 seconds until it flashes red and green, then quickly click the switch on the wireless remote — the light will flash green to confirm pairing was successful.

Note: 1) After the first connection, the wireless remote switch automatically memorizes the paired status; there is no need to pair again afterward. 2) Keep the wireless remote switch within about 1.5 meters (linear distance) of the light during the pairing process.

Output Selection: With the light switched on, click the output selection switch on the wireless remote to cycle through Eco/EDC → Low → Med → High → Burst.

Instant Burst: With the light switched on or off, quick-click the Burst switch to instantly switch to 2200-lumen output; the light automatically returns to its previous mode (or powers off) about 30 seconds after the Burst button is released.

Battery Specifications

  • Fenix ARB-L18 series 18650, 3.6V — Recommended.
  • Non-rechargeable Lithium CR123A, 3V — Usable.
  • Rechargeable Li-ion 16340, 3.6V/3.7V — Usable.
  • Rechargeable LiFePO4 16340, 3.2V — Use with caution.
  • Rechargeable Li-ion 18650, 3.6V/3.7V — Recommended.
  • Rechargeable LiFePO4 18650, 3.2V — Use with caution.
  • Rechargeable Li-ion 18350, 3.6V/3.7V — Not permitted.

Warning: Do not mix batteries of different brands, sizes, capacities, or types, and do not mix new and used batteries. Only use protected batteries suited for high-drain devices; an unsuitable cell carries a risk of combustion or explosion.

Battery Replacement

  • Rotate the tail cap counterclockwise to unlock it, then pull it out to open the battery compartment.
  • Insert the batteries, matching the polarity markings shown inside the battery compartment.
  • Reinsert the battery cover into the body and rotate the tail cap clockwise until snug to lock it in place.

Low-Voltage Warning

The functional switch flashes red to remind the user to replace or recharge the batteries when the voltage level drops below a preset level. The light will maintain a low-lumen output rather than shutting off automatically. Note: this warning may not function reliably when CR123A batteries are used.

Overheat Protection

The light will accumulate a lot of heat when working on Burst or High mode. The light will automatically step down the output when the temperature reaches a certain level to protect the light and the user.

Mounting Instructions

  • Loosen the screw on the bike mount and position it on the bike handlebar, aligning it with the front of the light.
  • Tighten the mount ring around the handlebar by rotating it clockwise until secure, using the shims provided to fit different handlebar diameters.
  • Slide the light onto the mount until it clicks securely into place.

Note: If the light and wireless remote switch will not be used for an extended period (over 6 months), remove the batteries from both to avoid damage from leakage, and recharge periodically to maintain optimal battery life.

Usage and Maintenance

  • Disassembling the sealed head can cause damage to the light and will void the warranty.
  • Scratches on the anodized surface do not affect performance.
  • If the light is used regularly, periodically check the O-rings for wear and replace them if damaged.
  • Regularly clean and dry the light and the wireless remote switch to maintain functionality.

Warning

This light is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone's eyes.

Technical Parameters

  • Burst: Output 2200 lumens, Distance 187 meters, Intensity 8792 candela
  • High: Output 1500 lumens, Runtime 2.3 hours, Distance 155 meters, Intensity 5913 candela
  • Med: Output 600 lumens, Runtime 6 hours, Distance 96 meters, Intensity 2320 candela
  • Low: Output 200 lumens, Runtime 16 hours, Distance 56 meters, Intensity 780 candela
  • Eco/EDC: Output 50 lumens, Runtime 50 hours, Distance 28 meters, Intensity 196 candela
  • Flash: Output 600/50 lumens

All modes: Waterproof IP67. Parameters lab-tested by Fenix using Fenix ARB-L18-3500 Li-ion batteries at room temperature and may vary between environments.

Included

Fenix BC30 V2.0 bicycle light, bicycle mount, wireless remote switch, CR1632 button battery, spare O-ring, user manual, warranty card.

Fenix BC30 V2

Overall rating: 4.772152 / 5 from 79 reviews.

AI Generated Review Summary

The Fenix BC30 V2 LED Bike Light offers exceptional brightness with a maximum output of 2200 lumens and a beam distance of 610 ft. Customers praise its dual-beam design, adjustability, and quality. The mount is well-liked, though opinions on the switch and brightness settings vary.

Summary topics

  • Brightness (70%): Many customers remarked that the light is great, incredible, awesome, superb, and bright, making it highly recommended.
  • Beam Adjustability (9%): Customers raved about the beam on this bike light, praising its brightness and adjustability.
  • Mount Quality (15%): A significant number of customers loved the mount, describing it as burly and better than before.
  • Battery Life (29%): Many customers raved about the removable 18650 batteries, praising their brightness and long-lasting life.
  • Overall Quality (10%): It was reported by customers that the lights from Fenix are of exceptional quality and met expectations.

Review topics: [].

Review highlights

  • "* Very good beam spread * Replaceable batteries no fear of low power, in the wilderness there's no outlet." — Nat C.
  • "the mount is secure and easy to use...also love the battery indicator as its easy to read and understand" — Michael D.
  • "Love the adjust ability of the beam and the remote switch." — Michael D.

Reviews

"Very good light"

— Elder (5/5)

Bright, Durable, Replaceable batteries

"Bought first BC30 7 years ago, always works. I have 5 bikes, this BC30 is now my 4th Bike light. Might get 1 more. * Very good beam spread * Replaceable batteries no fear of low power, in the wilderness there's no outlet. * Dual LED backup if one fails * Minimal drain even 5+ month * Stobe mode lasted 20+ hours. * Removable from bike clamp took this all over the world. * Swivel clamp base point in the direction you need. * Emergency Turbo warning opposing traffic. I road biked 30 miles (~2 hrs) everyday never have to worry. Even red low batteries indication, the light always brought me home safely."

— Nat C. (5/5)

Great bar light for 24s and bikepacking

"Superb light. I've used it for 24 hour racing and bikepack racing. In a 24 it is bright with long throw - it actually overpowers my hangover so I need something better for the helmet. I can easily get a full night using the various power levels for bikepack events. This one is a no-brainer!"

— Dave H. (5/5)

I like to ride my

"I like to ride my bike at night because there is a lot less traffic. The Fenix BC30 V2 LED Bike Light not only allows me to be seen but to see animals and unforeseen hazards by providing accident prevention illumination of the foreground. I mounted the light on my helmet, which allows me to direct the light where it’s needed the most. I’m extremely satisfied with the BC 30 V2 LED bike light by Fenix. It was exactly what I was looking for. Now I ride safer and happier thanks to this genius of a bike light."

— Richard S. (5/5)

batteries not included

"the light is great but I have a problem the customer service. In the advertisement they didn't mention the fact that the light didn't come with batteries, and it takes 2 @ $35. 00 each. I have bought 3 different flashlights from them and all came with batteries and ready to use"

— gary o. (2/5)

Best headlamps & bike Lights

"Great light output, use the same batteries for headlamp & bike light. If you plan to off road buy the bike light upgraded base"

— zzBlank z. (5/5)

A great light with an awful mount

"I have owned two versions of this product over 6 years and in both cases the quick release spring in the mounts failed. The first time, it rusted out. The second time, it snapped after 10 months of gentle use in fair weather road riding. Buyer beware: If this happens to you, you will be pleased to receive a replacement free of charge, but when it happens again, Fenix's Customer Service will only give you a 10% discount to spend more money on this inferior design. Fenix's website labels "Satisfaction Guaranteed" with its products, but from my experience it's evident that Fenix doesn't completely stand behind its products."

— Sean S. (2/5)

Stunning - Literally!

"I use mine on the top of my helmet - a little heavy but not too bad. The amount of light this thing chucks out is crazy for its size. Battery would last a few hours I'd say (2x 2600 MAh), I only use for about an hour a time and the indicator hasn't dropped below medium. Remote control is very handy (pun intended) also!"

— Stone (4/5)

Great quality at lower price

"This is my 4th Fenix bike light. The three (BT20, BTR20 & BT10) are all still working fine except that the battery pack of BT20 wont lock anymore so I have to use rubber band to close it. This light BC30 is made of aluminum and don't foresee having that problem. I bought this because I added bikes and each bike has different purpose. This one goes to my commuter bike. I also have other lights from Fenix from E12 to TK35UE, great quality at lower price."

— Jerry E. (5/5)

Bought for nighttime MTB rides

"This is an excellent light, I have the Fenix headlamp and combined with this bike light I am able to ride single track trail at night almost as fast as I could in the day.Beam on highest setting is very bright. No complaints, haven’t found a use for the remote control function but maybe I need to think outside the box. Quality Construction and materials. Easy to put on and take off, good battery life. Definitely recommend."

— John S. (5/5)

Q&A