The Fenix TK22R Pro is a dual-mode tactical flashlight. This summary is drawn from the manufacturer's official user manual for the Fenix TK22R Pro.
Technical Parameters (ANSI/PLATO FL1)
Tactical mode
- Turbo: 4200 lumens, 2 hours 10 minutes*, 440 meters, 48,100 cd
- Eco: 50 lumens, 35 hours, 50 meters, 630 cd
- Strobe: 3000 lumens
Duty mode
- High: 3000 lumens, 2 hours 25 minutes, 390 meters, 37,000 cd
- Med: 1000 lumens, 3 hours, 225 meters, 12,800 cd
- Low: 350 lumens, 11 hours 10 minutes, 130 meters, 4,250 cd
- Eco: 50 lumens, 35 hours, 50 meters, 630 cd
- Instant Turbo: 4200 lumens (same as Tactical mode Turbo)
Impact resistance: 1 meter. Submersible: IP68. Specifications are from Fenix's laboratory testing using one Fenix ARB-L21-5500 battery at 21±3°C and 50-80% humidity; real-world performance may vary with working environment and the battery used. *Turbo runtime is measured in total, including output at reduced levels due to temperature or protection mechanisms.
Safe Use Warnings
- Do not look directly at the light source, stare at the light spot, or shine the flashlight into anyone's eyes.
- Keep this flashlight out of the reach of children.
- Do not place the light head near flammable objects. High temperatures can cause objects to overheat and ignite.
- Do not use this flashlight in inappropriate ways, such as holding it in your mouth. Doing so could cause serious injury or death if the flashlight or battery fails.
- The flashlight gets hot during use. Take care to avoid burns.
- Turn off and lock the flashlight, or remove the battery, when carrying it in a closed space such as a pocket or backpack.
- The LEDs are not replaceable; the whole flashlight needs to be replaced when an LED reaches the end of its life.
Product Features
- 4200 lumens maximum output, 440 meters maximum beam distance.
- 3-in-1 smooth reflector with three Luminus SFT42R LEDs.
- Patented FlexiSensa control toggle switch for Duty mode, Lockout mode, and Tactical mode.
- Dual tail switch and FlexiSensa toggle switch for fast, accurate operation.
- Powered by an included Fenix ARB-L21-5500 battery.
- USB Type-C charging port with a flip cover; supports fast charging.
- Battery level indicator at the tail.
- Internal dual-spring structure keeps the light stable under severe impact.
- Titanium-plated stainless steel strike bezel with three tungsten steel glass-breaking tips.
- Toughened ultra-clear glass lens with anti-reflective coating on both sides.
- A6061-T6 aluminum body with a premium HAIII military-grade hard-anodized finish.
- Size: 6.50" x 1.57" x 1.02" / 165 x 40 x 26 mm.
- Weight: 8.85 oz / 250.8 g (including battery).
Operating Instructions
On: With the light locked and the tactical switch fully pressed, turn the toggle switch from Lockout to either mode to turn the light on. With the light unlocked and off, tap the tactical switch for momentary light or fully press it for constant light.
Off: With the light unlocked and on, fully press the tactical switch, or turn the toggle switch to Lockout.
Mode Switching: With the light head facing up, turn the toggle switch (left to right) to select Duty mode → Lockout mode → Tactical mode.
Output Selection: Duty mode: with the light on, single click the functional switch to cycle Eco → Low → Med → High. Tactical mode: with the light on, single click the functional switch to switch between Eco and Turbo.
Instant Turbo (Duty mode only): With the light on, press and hold the functional switch for 0.5 seconds to enter and lock Turbo; single click to return to the previous output. With the light off, press and hold the functional switch for momentary Turbo; release to turn off.
Instant Strobe (Tactical mode only): With the light on, press and hold the functional switch for 0.5 seconds to enter Strobe; single click to return to the previous output. With the light off, press and hold the functional switch for momentary Strobe; release to turn off.
Intelligent Memory Circuit: The flashlight remembers the last output used and recalls it when turned back on.
Battery Specifications
- Fenix ARB-L21-5500: 21700, 3.6V, Recommended
- Fenix ARB-L21-5500U: 21700, 3.6V, Recommended
- Fenix ARB-L21-5000 V2.0: 21700, 3.6V, Recommended
- Fenix ARB-L21 series: 21700, 3.6V, Recommended
Do not use an 18650 or 16340 battery. Do not mix batteries of different ages, capacities, or types. 21700 Li-ion batteries are powerful cells and must be handled with care. Low-quality or mishandled batteries (short-circuited or overheated, for example) can lead to fire or explosion, and damage from low-quality batteries is not covered by the Fenix warranty. Quality batteries with circuit protection reduce this risk.
Battery Replacement
Unscrew the light head and insert the battery with the positive (+) end toward the light head, then screw the light head back on.
Charging
- Turn off the flashlight and open the flip cover to reveal the USB Type-C port, then connect the charging cable.
- The charging indicator below the flip cover shows red while charging and turns green when fully charged.
- When charging is complete, unplug the cable and close the flip cover.
- If charging fails or the battery is inserted backwards, the indicator flashes red or stays off; check the battery.
- Charging voltage 5V/9V; maximum charging power 26W (9V/2.9A). With a 9V/2.9A adapter, a full charge takes about 1.5 hours. Use only a certified USB charging adapter.
- Recharge a stored flashlight every four months to keep the battery in good condition.
- The flashlight cannot be used while charging.
*Charging features work only with a Fenix ARB-L21 series battery.
Battery Level Indication
With the light off, single click the functional switch; the tail indicator shows the battery level for 3 seconds. With the light locked and the tactical switch fully pressed, the indicator shows the battery level until the switch is released.
- Green light on: 100–85%
- Green light flashes: 85–50%
- Red light on: 50–25%
- Red light flashes quickly: 25–1%
*Works only with a Fenix ARB-L21 series battery.
Intelligent Overheat Protection
At high output for extended periods the flashlight builds up heat. At 60°C/140°F or above, it automatically steps down a few lumens to lower the temperature, and gradually returns to the set output once it drops below 60°C/140°F.
Low-Voltage Warning
When the battery voltage drops below a preset level, the flashlight steps down to lower outputs until it reaches Low. In Low, it blinks three times every five minutes as a reminder to recharge or replace the battery. It does not shut off automatically and keeps working until the battery runs out or battery protection activates. *Works only with a Fenix ARB-L21 series battery.
Usage and Maintenance
- Disassembling the sealed head can damage the flashlight and will void the warranty.
- Keep the flashlight charged so it's ready the next time you need it.
- Use a high-quality battery.
- If the flashlight won't be used for an extended period, remove the battery to prevent damage from electrolyte leakage.
- Lock the flashlight or remove the battery during storage or transport to prevent accidental activation.
- O-rings wear over time. Replace with an approved spare to keep the water seal.
Dirty contacts can cause flickering, intermittent light, or failure to turn on. If the battery is low, recharge or replace it; if the contacts are dirty, clean them with a cotton swab dipped in rubbing alcohol. If that doesn't fix it, contact Fenix Store support through live chat (the chat button on any page of fenix-store.com) or at support@fenix-store.com.
What's Included
- Fenix TK22R Pro flashlight
- ARB-L21-5500 battery
- USB Type-C charging cable
- Holster
- Lanyard
- Spare O-ring
- User manual
- Warranty card
Warranty and Support
Keep your proof of purchase and contact Fenix Store support through live chat (the chat button on any page of fenix-store.com) or at support@fenix-store.com for warranty service. See our Warranty and Repair page for details.