Fenix LD12R Dual Light Flashlight - 600 Lumens

Performance Highlights

• Main Light: up to 600 lumens and a 610 ft (186 m) beam for standard flashlight use
• Side Light: up to 100 lumens of flood lighting for reading and close-range tasks
• Endurance: Moonlight mode runs up to 110 hours on the included battery

Full mode-by-mode output, runtime, distance, and intensity figures are shown in the specifications chart above.

Key Features

• Dual light source: rotate the flashlight head to switch between main (front) and side (reading) LEDs
• Magnetic body clip for hands-free, convenient mounting
• Hidden USB Type-C charging port
• Compatible with the Fenix AOD-S V2.0 diffuser tip
• Intelligent memory circuit and intelligent overheat protection
• Flat base for tail-standing; all-metal CNC-machined, HAIII hard-anodized body
• IP68 waterproof and 1-meter impact resistant

Battery & Charging

• Included: One Fenix ARB-L14-800 rechargeable 14500 battery
• Compatible: One standard AA (Ni-MH or Alkaline) battery — High output is unavailable on AA
• Charging: USB Type-C, about 2 hours from depleted with the light off

Size & Weight

• Dimensions: 4.76 in length, 0.87 in diameter
• Weight: 2.61 oz

Q1. What are the key features of LD12R?

A: Fenix LD12R is a dual light source multifunctional flashlight. Its key features include:

1. Unique side light source.
2. Magnetic body clip.
3. Hidden USB Type-C charging port. 

Q2. What kind of LED is used in LD12R?

A: The main light uses a Luminus SST20 cold white LED and the side light uses a SC1818C LED; with a lifespan of 50,000 hours.

Q3. What is the color temperature of LD12R?

A: Around 6500K.

Q4. What is the working voltage of LD12R?

A: The operating voltage is 2.8V-4.2V while using a Fenix ARB-L14-800 battery. 

The operating voltage is 0.9V-1.6V while using an AA Ni-MH or Alkaline battery.

Q5. Is LD12R rechargeable? How long is the charging time? 

A: Yes. Loosen the light head to reveal the USB Type-C charging port. The indicator will display red while charging and will turn green when fully charged. The normal charging time is approximately 2 hours from depleted to fully charged.

The Fenix LD12R is a dual light source, multipurpose portable flashlight. This summary is drawn from the manufacturer's official user manual — see the downloadable PDF reference manual on the product page for complete details.

Overview

• 600 lumens maximum output, 186 meters maximum beam distance.
• Uses high-quality LEDs with a lifespan of 50,000 hours.
• Convenient flashlight-head rotary design for swiftly choosing between the main light and the side light.
• Includes an ARB-L14-800 battery; also compatible with a single AA Ni-MH or Alkaline battery.
• Hidden USB Type-C charging port.
• Battery level indication LED and low-voltage warning.
• Included magnetic body clip for hands-free, convenient operation.
• Compatible with the Fenix AOD-S V2.0 diffuser tip for different lighting needs.
• Intelligent overheat protection circuitry to guard against high surface temperatures.
• All-metal CNC-machined light body.
• Premium type HAIII hard-anodized anti-abrasive finish.
• IP68-rated protection.
• Size: 4.76" x 0.87" x 0.75" / 121 x 22 x 19mm.
• Weight: 2.61oz / 74g (including battery).

Operating Instructions

On/Off: Fully press the tail switch to turn the flashlight on or off.

Mode Switching: With the light switched on, loosen the light head until the light goes off, then tighten the light head again to switch between the main light and the side light.

Output Selection — Main Light: With the light switched on, tap the tail switch to cycle through Moonlight → Low → Med → High.

Output Selection — Side Light: With the light switched on, tap the tail switch to cycle through Low → Med → High.

Intelligent Memory Circuit

The main light memorizes the last selected output. With the light switched off for over 1 hour, turning it on again recalls the previously used output.

Battery Specifications

• Fenix ARB-L14 Series, 14500, 3.6V — Recommended.
• Ni-MH battery, AA, 1.2V — Usable.
• Alkaline battery, AA, 1.5V — Usable.
• Non-rechargeable battery (Lithium), AA, 1.5V — Usable.

Warning: 14500 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only quality batteries reduce the potential for combustion or explosion; damage from short-circuiting or other adverse effects is considered user-induced and is not covered by the Fenix warranty. Note: the main light's High output cannot be operated while using an AA battery.

Battery Replacement

Unscrew the tail cap and insert the battery with the anode (+) side toward the tail switch, then screw the tail cap back on.

Charging

• With the light switched off, loosen the light head until you can see the USB Type-C charging port, then plug the USB-A end of the charging cable into an approved USB power source and connect the USB Type-C end to the light.
• The indicator displays red while charging and turns green when fully charged.
• Once charging is complete, be sure to tighten the light head to maintain dustproof and waterproof performance.

Note: The normal charging time of the included Fenix ARB-L14-800 battery is approximately 2 hours from depleted to fully charged with the light off. The flashlight cannot be operated while charging.

Battery Level Indication

Loosen the light head to reveal the battery indicator. Press the switch — the indicator will flash for 3 seconds to show the remaining battery power.

• Green light on: saturated, 100% - 85%
• Green light flashes: sufficient, 85% - 50%
• Red light on: poor, 50% - 25%
• Red light flashes: critical, 25% - 1%

Note: This feature only works with a Fenix ARB-L14 Series battery.

Low-Voltage Warning

When the voltage level drops below the preset level, the light will step down to a lower brightness level until Moonlight output is reached. Once Moonlight output is reached, the light blinks three times every 5 minutes to remind you to recharge or replace the battery. Note: this feature only works with a Fenix ARB-L14 Series battery.

Intelligent Overheat Protection

The flashlight will accumulate heat when used at high output levels for extended periods. The light will automatically step down a few lumens to reduce the temperature to a safe level when this occurs.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent-quality battery.
• If the light will not be used for an extended period, remove the battery, or it could be damaged by electrolyte leakage or battery explosion.
• Long-term use can result in O-ring wear; to maintain a proper water seal, replace the ring with an approved spare.
• Periodically clean the battery contacts — dirty contacts may cause the lamp to flicker, shine intermittently, or fail to illuminate. A) Poor battery level: recharge or replace the battery. B) Dirty threads, PCB board, or other contacts: clean with a cotton swab soaked in rubbing alcohol. If neither resolves the issue, contact your authorized distributor.

Warning

• Keep this flashlight out of the reach of children.
• Do NOT shine the flashlight directly into anyone's eyes.
• Do NOT place the light head near flammable objects — high temperatures can cause objects to overheat and ignite.
• Do NOT use the flashlight in inappropriate ways, such as holding the unit in your mouth; doing so could cause serious personal injury or death if the flashlight or internal batteries fail.
• This flashlight will accumulate a significant amount of heat while operating, resulting in a high temperature of the flashlight shell — pay close attention to avoid burns.
• Remove the battery to prevent accidental activation when the flashlight is placed in a closed, flammable environment such as a pocket or backpack.
• The LED of this flashlight is not replaceable, so the whole flashlight will need to be replaced when the LED reaches the end of its lifespan.

Technical Parameters

• Main Light High: Output 600 lumens, Runtime 1h20min*, Distance 186 meters, Intensity 8616 candela
• Main Light Med: Output 150 lumens, Runtime 3h20min, Distance 90 meters, Intensity 2052 candela
• Main Light Low: Output 30 lumens, Runtime 16h20min, Distance 40 meters, Intensity 424 candela
• Main Light Moonlight: Output 1 lumen, Runtime 110 hours, Distance 9 meters, Intensity 18 candela
• Side Light High: Output 100 lumens, Runtime 4 hours, Distance 12 meters, Intensity 38 candela
• Side Light Med: Output 30 lumens, Runtime 14h30min, Distance 7 meters, Intensity 12 candela
• Side Light Low: Output 5 lumens, Runtime 53 hours, Distance 3 meters, Intensity 3 candela

All modes: Impact Resistance 1 meter, Waterproof IP68. *The High output runtime is the total accumulated time including output at reduced levels due to the built-in temperature protection mechanism. Parameters lab-tested by Fenix using a Fenix ARB-L14-800 battery at 21±3°C and 50%-80% humidity; actual performance may vary by environment and battery used.

Included

Fenix LD12R flashlight, ARB-L14-800 battery, USB Type-C charging cable, spare O-ring, lanyard, user manual, warranty card.